Product added to cart
BLTouch v3.1 - Genuine Antclabs Auto Bed Leveling Sensor
€45.00
In stock
SKU
HW2086EC
Genuine BLTouch! Great solution to easily implement auto bed-leveling! Check the documentation on how to connect a number of different controller boards!
Genuine BLTouch! Great solution to easily implement auto bed-leveling! Comes with pre-crimped connectors. Check the documentation on how to connect to a number of different controller boards.
BLTouch is an auto leveling sensor for 3D Printers that can precisely measure the tilt of Bed surface. It could work with any kinds of bed materials, such as glasses, woods, metals, and so on.
Main functions and controls of BLTouch are the same as usual auto bed leveling sensor, consists of RC servo and micro switch. Thus, BLTouch can be applied on almost every board.
BLTouch is fulfilled with simple structure and high precision by using progressively designed solenoid and hall sensor. It aims for user convenience and enjoyable printing by adding many smart functions, such as self-test, alarm, alarm release & Touch Switch mode, Blue LED for servo signal indicating and Z-probe(Zmin) Testing.
Simple BLTouch can be easily applied, since it has a small and simple structure. As BLTouch works as usual auto bed leveling sensor, Gathering information & setting up your firmware will be an easy task.
Smart Self-test: The push pin operate two times in a test when the power is on. Alarm: The LED light blinks if a problem was found on a self-test or during operation Wiring defect indicator: Blue and Red LED for indicating wiring defects.
High-precision BLTouch’s Standard Deviation in repeatability is around 0.005mm.
Logic Voltage Free 3.3V / 5V logic voltage free(default).
Long stroke : ≒ 6.5mm The stroke becomes 1.6mm longer than the previous stroke. BLTouch v3.1 Manual BLTouch v3.1 Easy wiring guides
We found other products you might like!
Write Your Own Review