Product Description
Details
Motorize your V-Slider or V-Slider Mini with this lightweight motorizing kit.
Motorized sliders have been too expensive for too long. We are here to change that.
FEATURES
Multiple speed ranges - continuous motion with a huge range of speeds available
Power options: our controller accepts 12V DC so you can use your favourite power supply. we’ve included a battery pack in case you don’t have any.
Easy setup: assemble your kit in minutes. This kit is designed to be as simple as possible. No extra tools needed.
Two alternative setups: if the camera head you're using is very large, dont' worry, we've included all the parts for a reversed assembly where the motor is turned upside down (check photo).
PACKAGE CONTENTS
V-Motion Lite Controller - choose speed and direction of movement (left or right)
V-Motion Motor - choose one of 3 speed ranges (more info below)
Set of mechanical parts - to attach the motor to your slider
Battery pack - power up your kit with 8 AA batteries (batteries not included)
You can also buy an AC Power Adapter to use the mains as an alternative power source.
MOTOR OPTIONS
Choose the motor best suited for your needs:
Timelapse motor - motion is almost unnoticeable in real time
Top speed: 1 meter in 18 minutes (1 RPM)
Lowest speed: 1 meter in 3 hours
Max. Power consumption: 0.09A
Standard motor - adequate for timelapses in its slowest setting, adequate for real time action in its fastest
Top speed: 1 meter in 38 seconds (28 RPM)
Lowest speed: 1 meter in 9 minutes
Max. Power consumption: 0.15A
Fast motor - great range of speeds for real time action.
Top speed: 1 meter in 18 seconds (57 RPM)
Lowest speed: 1 meter in 3 minutes
Max. Power consumption: 0.29A
You can buy more than one motor and easily swap them when you need.
TECHNICAL NOTES
Load capacity
Tested with 10 Kg with a fully horizontal V-Slider. Inclination will influence performance.
Third-party power sources
You can use a third-party power source with your V-Motion Lite as long as it is rated at 12V DC and has a standard DC barrel jack.
If you use an AC adapter make sure it is rated at 2A or more.
