Welcome to Rat Rig!

New

Bondtech LGX - Large Gears eXtruder

Be the first to review this product

The Bondtech LGX™ Large Gears eXtruder is the first of their filament feeders using Bondtech’s new Dual Drive Technology based on larger drive gears.

Availability: In stock

€109.99

Product Description

Details

The Bondtech LGX™ Large Gears eXtruder is the first of our filament feeders using Bondtech’s new Dual Drive Technology based on larger drive gears.

7 new features on a Bondtech eXtruder:
-Larger drive wheels, for increased filament grip;
-Filament pre-tension lever, for repeated results;
-Multi-function interface socket, for tool or application quick swap;
-Drive wheels’ maintenance windows, for easy cleaning;
-Compact, light & symmetric design, for increased performance and compatibility;
-Multiple mounting hole patterns, for easy and flexible setup;
-A small step for a greener Future, craft boxes without bleaching & no coating.
You can read more about the new features by going to Bondtech website.

3D Printed Housing using PA12
The housing parts are professionally printed with nylon for maximum strength and precision and higher temperature resistance.

Extruder and Stepper Motor go together
Preferably, you should always use the extruder attached to the stepper motor when you mount it on a printer.

If you need to put a plate in between the stepper motor and the extruder please notice that you need longer screws, and the max supported thickness is 3mm.

This image below shows what screws are used on the LGX, and the red ones are used to attach the stepper motor and extruder:


To use a plate in between the stepper motor and the extruder, you need to replace the stock M3x27 low head screws with the 3 M3x30 low head screws we send in the accessories bag, which are compatible with printer plates of thicknesses between 2 and 3mm.
Don’t use a plate in between without using the longer screws.

4 ADDITIONAL MOUNTING POINTS
Use the supplied studs to replace the 4 screws of the stepper motor and use them as additional mounting points.

You can find these studs on the accessories bag in your LGX™ package.

They have a M3 thread with 4 mm depth.


Each LGX™ extruder is supplied with:

-1x LGX™ feeder;
-1x Custom LDO Nema17 25mm pancake stepper motor;
-1x Bowden Interface Plug (with threaded metal push-fit);
-1x Direct Drive Interface Plug (for Slice Engineering hotends);
-1x 2mm Hex Key (recommended tool);
-1x Product Line Information Brochure;
-1x Powered By Bondtech sticker.
-Now also shipping with additional accessories:

-3x M3x30 mm Low Head screws;
-4x M3x18 mm Stud with 5 Hex with M3x4 thread;
-30mm PTFE tube to use in the Direct Drive Interface Plug.


Technical Specification
LGX™ EXTRUDER
-e-steps value : 400 on 16 bit micro-stepping setups; 800 on 32 bit micro-stepping setups.
-Drive wheels : hardened steel;
-Materials compatibility : abrasive; rigid; semi-flexible; flexible; and soft.
-Mounting holes : M3
-Mounting patterns : bottom anterior (2 points); left (2 points), right (2 points), front (4 points), back (4 points)
-Holes on the sides of the LGX™ : 5 mm depth
-Holes on the bottom of the LGX™ : 12 mm depth
-Max tightening torque on all screws is 0.3 Nm
-retraction speed : 35 mm/s
-retraction distance (bowden) : ~5 mm (0.4 + tube length x 0.15)
-retraction distance (direct drive) for rigid materials : 0.4 mm
-retraction distance (direct drive) for soft materials : 3 mm
-Max Environment operating temperature : 70°C
-LGX™ DD net weight : 218.6 g
-LGX™ B net weight : 224 g
-Package measurements : 80x103x73 mm
-Package weight : 269 g
-Download the LGX Technical Drawings from the Bondtech website.
-LDO STEPPER MOTOR FOR BONDTECH LGX™
-PH-06AWJ connector
-2 phases
-DC 5.5 V
-Max 1.0A/phase
-To use the LGX and run the stepper motor with currents between ~0.7 and ~0.9A:
-set Vref between 0.70 and 0.90 using TMC stepper drivers;
-set Vref between 0.28 and 0.36 for stock Pololu A4998 stepper drivers;
-set Vref between 0.56 and 0.72 for Pololu A4998 stepper drivers on Creality.
-Class B motor, rated up to 130°C
-Max recommended environment : 70°C
-Max temperature at this environment temperature can go up to 130°C on account of the self heating.

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.