Welcome to Rat Rig Hardware!

8mm Metric Acme Lead Screw - 1000mm

Be the first to review this product

8mm Metric Acme Lead Screw - 1000mm

Availability: In stock

€36.68

Product Description

Details

This precision trapezoidal (metric) lead screws pitch and diameter are a perfect combination of high torque and speed. This screw fits the bill for most machine designs and will quickly become a standard on OpenBuilds.

Equipped with a large diameter that helps eliminate whipping and a high pitch which provides a quick 8mm translation for every revolution on the screw. 

It's a great power transmition choice for your next build.

  • Tr8*8-4
  • Lead Screw Diameter ∅ 8 (mm)
  • Pitch 2 (mm)
  • Lead 8 (mm)
  • Stainless Steel

An example steps settings for your control software would be 200 steps per millimeter if you are running your steppers at 1/8 step mode.

To calulate the steps for your control software have a look at these handy steps calculators 

 

tr8x8-dwg.jpg

 

Lead Screw Lengths

Actual lengths have been extended to allow for different connection points.

  • 290mm
  • 540mm
  • 1040mm

 

Please Note: The leads have a very slight larger diameter then the ID of the bearings. It is a very small difference and insures that the bearing has no to little axial play once the lead is inside.  You will want to take very fine sand paper (like 220 grit) and sand the ends of the Lead Screw about 2” in from each end to allow your bearing a nice fit to slip onto the ends of the lead.

Use with the V-Slot Nut Plate and Nut Block

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.